Home  |  Contact Us  |  College of Engineering Home  |  UK Home  |  Comments | Site Map

Services | Research | Training for Industry | Academic Programs | About Us | Contact Us
Graphic Version

University of Kentucky
College of Engineering

 UK Center for Manufacturing
education. . .technical assistance. . .research

RESEARCH PUBLICATIONS  
(Including Book, Edited Books, Book Chapters, Refereed Journal and Conference Papers)
AND U.S. PATENTS AND COPYRIGHTED SOFTWARE

 (1990-to date)

 

(a) Edited Books: Conference Proceedings and Special Issue of Journal

  1. Stevenson, R. and I.S. Jawahir, Proc. 5 th CIRP International Workshop on Modeling of Machining Operations, West Lafayette, IN, USA, May 2002, (ISBN 0-9666706-1-2), University of Kentucky Publishers, 160 pages.
  2. J.C. Hamann, I.S. Jawahir and C.A. van Luttervelt (Editors ), “Modeling of Machining Operations”,Special Issue of the Int. J. Forming Processes, Vol. 3(1), Hermes Science Publishers, Paris, France, 2000, 176 pages.
  3. Jawahir, I.S., A.K. Balaji and R. Stevenson (Editors), Proc. CIRP International Workshop on Modeling of Machining Operations, Atlanta, GA, USA, May 1998, (ISBN 0-9666706-0-4), University of Kentucky, 453 pages.

 

(b) Book Chapters 

  1. Jawahir, I.S., P.C. Wanigarathne and X. Wang, “Chapter 12: Product Design and Manufacturing Processes for Sustainability”, Mechanical Engineering Handbook, 3 rd Edition, Vol. 3, Manufacturing and Management, John Wiley & Sons, October 2005, pp. 414-443.
  2. Jawahir, I.S., “Designing for Machining: Machinability and Machining Performance Considerations”, Volume 24, Handbook of Metallurgical Design, (Editors: G.E. Totten, K. Funatani and L. Xie), Marcel Dekker Publishers, NY, USA, May 2004, pp. 919-958.
  3. Jawahir, I.S. and A.K. Balaji, “Chapter 21: Machining”, Handbook of Aluminum Metallurgy, Processes and Equipment, Marcel Dekker Publishers, NY, USA, March 2003, pp. 1063-1103.
  4. Jaafar, I.H., A. Venkatachalam, K. Joshi, A.C. Ungureanu, N. De Silva, K.E. Rouch, O.W. Dillon, Jr., and Jawahir, I.S., “Product Design for Sustainability: A New Assessment Methodology and Case Studies ”, Handbook of Environmentally Conscious Mechanical Design, John Wiley & Sons, (Submitted in July 2006).

 

 (c) Refereed Journal Papers 

Published Journal Papers 

  1. Teti, R., I.S. Jawahir and K. Jamelniak, T. Segreto, S. Chen and J. Kossakowska “Chip Form Monitoring through Advanced Processing of Cutting Force Sensor Signals”, Annals of the CIRP, Vol. 55(1), 2006, pp. 75-80.
  2. Outeiro, J.C., A.M. Dias and I.S. Jawahir, “On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations”, Annals of the CIRP, Vol. 55(1), 2006, pp. 111-116.
  3. Wanigarathne, P.C., A.D. Kardekar, O. W. Dillon, Jr., G. Poulachon and I. S. Jawahir, “Progressive Tool-wear in Machining with Coated Grooved Tools and Its Correlation with Cutting Temperature”, J. Wear, Vol. 259, 2005, pp. 1215-1224.
  4. Ee, K.C., O.W. Dillon, Jr. and I.S. Jawahir, “Finite Element Modeling of Residual Stresses in Machining Induced by Cutting Tool with a Finite Edge Radius”, Int. J. Mechanical Sciences, Vol. 47, 2005, pp. 1611-1628.
  5. Wang, X. and I.S. Jawahir, “Optimization of Multi-pass Turning Operations Using Genetic Algorithms for the Selection of Cutting Conditions and Cutting Tools with Tool-wear Effect”, Int. J. Production Research, Vol. 43(17), 2005, pp. 3543-3559. 
  6. Chen, S., D. Head, M. Effgen and I.S. Jawahir, “An Investigation of Sustained Machining Performance for Controlled Surface Quality Requirements in Porous Tungsten”, Trans. IEEE on Electron Devices, Vol. 52(5), May 2005, pp. 903-908.
  7. Poulachon, G., A. Albert, M. Schluraff and I.S. Jawahir, “An Experimental Investigation of Work Material Microstructure Effects on White Layer Formation in PCBN Hard Turning”, Int. J. Machine Tools and Manufacture, Vol. 45, 2005, pp. 211-218.
  8. Poulachon, G., B.P. Bandyopadhyay, I.S. Jawahir, S. Pheulpin and E. Seguin, “Wear Behavior of CBN Tools While Turning Various Hardened Steels”, J. Wear, Vol. 256, 2004, pp. 302-310.
  9. Ekinovic, S., S. Doninsek and I.S. Jawahir, “Some Observations of the Chip Formation Process and the White Layer Formation in High Speed Milling of Hardened Steel”, J. Machining Science and Technology, Vol. 8(2), 2004, pp. 327-340.
  10. Wang, X. and I.S. Jawahir, “Web-based Optimization of Milling Operations for the Selection of Cutting Conditions using Genetic Algorithms”, J. Engineering Manufacture - Proc. Inst. Mech. Engineers, United Kingdom, Vol. 218, 2004, pp. 647-655.
  11. Jawahir, I.S., A.K. Balaji, K.E. Rouch and J.E. Baker, “Towards Integration of Hybrid Models for Optimized Machining Performance in Intelligent Machining Systems”, J. Materials Processing Technology, Vol. 139(1-3), 2003, pp. 488-498.
  12. Fofana, M.S., K.C. Ee and I.S. Jawahir, “Machining Stability in Turning Operations when Cutting with a Progressively Worn Tool Insert”, J. Wear, Vol. 255, 2003, pp. 1395-1403.
  13. Ee, K.C., A.K. Balaji and I.S. Jawahir, “Progressive Tool-wear Mechanisms and their Effects on Chip Curl/Chip-form in Machining with Grooved Tools: An Extended Application of the Equivalent Toolface (ET) Model”, Wear, Vol. 255, 2003, pp. 1404-1413. 
  14. Fang, N. and I.S. Jawahir, “Prediction of Chip Back-flow Angle in Machining with Restricted Contact Grooved Tools”, ASME J. Manufacturing Science & Engineering, Vol. 125, 2003, pp. 210-219.
  15. Wang, X. and I.S. Jawahir, “Prediction of Tool-Chip Interface Friction and the Chip-groove Effects in Machining with Restricted Contact Grooved Tools Using the Universal Slip-line Model”, J. Key Engineering Materials, Vol. 233-236, 2003, pp.469-476.
  16. Poulachon, G., B. Badyopadhyay, I.S. Jawahir, S. Pheulpin, E. Seguin, “The Influence of the Microstructure of Hardened Tool Steels on the Wear of PCBN Cutting Tools”, Int. J. Machine Tools & Manufacture, Vol. 43, 2003, pp. 139-144.
  17. Wang, X., Z.J. Da, A.K. Balaji and I.S. Jawahir, “Performance-Based Optimal Selection of Cutting Conditions and Cutting Tools in Multi-Pass Turning Operations Using Genetic Algorithms”, Int. J. Production Research, Vol. 40(9), 2002, pp. 2053-2065.
  18. Fang, N. and I.S. Jawahir, “An Analytical Predictive Model and Experimental Validation for Machining with Grooved Tools Incorporating the Effects of Strains, Strain-rates, and Temperatures”, Annals of the CIRP, Vol. 51(1), 2002, pp. 83-86.
  19. Poulachon, G., M. Dessoly, J.L. Lebrun, C. Le Calvez, V. Prunet and I.S. Jawahir, “Sulphide Inclusion Effects on Tool-wear in High Productivity Milling of Tool Steels”, J. Wear, Vol. 253, 2002, pp. 339-356.
  20. Ee, K.C., A.K. Balaji, P.X. Li and I.S. Jawahir, “Force Decomposition Model for Tool-wear in Turning with Grooved Cutting Tools”, J. Wear, Vol. 249, 2002, pp. 985-994.
  21. Fang, N. and I.S. Jawahir, “Analytical Predictions and Experimental Validation of Cutting Force Ratio, Chip Thickness, and Chip Back-flow Angle in Restricted Contact Machining Using the Universal Slip-line Model”, Int. J. Machine Tools & Manufacture, Vol. 42, 2002, pp. 681-694.
  22. Balaji, A.K. and I.S. Jawahir, “Variable Tool-Chip Interfacial Friction in 2-D and 3-D machining Operations”, Int. J. Forming Processes, Vol. 4(1-2), 2001, pp. 111-123.
  23. Poulachon, G., A. Moisan and I.S. Jawahir, “On Modeling the Influence of Thermo-mechanical Behavior on Chip Formation During Hard Turning of 100Cr6 Bearing Steel” Annals of the CIRP, Vol. 50(1), 2001, pp. 31-36.
  24. Fang, N. and I.S. Jawahir, “A New Methodology for Determining the Stress State of the Plastic Region in Machining with Restricted Contact Tools”, Int. J. Mechanical Sciences, Vol. 43, 2001, pp. 1747-1770.
  25. Poulachon, G., A. Moisan and I.S. Jawahir, “Tool-wear Mechanisms in Hard Turning with Polycrystalline Cubic Boron Nitride Tools”, J. Wear, Vol. 250, 2001, pp. 576-586.
  26. Poulachon, G., D. Dessoly, C. Le Calvez, J.L. Lebrun, V. Prunet and I.S. Jawahir, “An Investigation of the Influence of Sulphide Inclusions on Tool-wear in High Speed Milling of Tool Steels”, J. Wear, Vol. 250, 2001, pp. 334-343.
  27. Balaji, A.K. and I.S. Jawahir, “Contour Turning of Aluminum Alloys with Flat-faced and Grooved Diamond Tools” J. Machining Science & Technology, Vol. 5(2), 2001, pp. 269-289.
  28. Fang, N., I.S. Jawahir and P.L.B. Oxley, “A Universal Slip-line Field Model with Non-unique Solutions for Machining with Curled Chip Formation and a Restricted Contact Tool”, Int. J. Mechanical Sciences, Vol. 43, 2001, pp. 557-580.
  29. Zhang, H., O.W. Dillon, Jr., and I.S. Jawahir, "A Finite Element Analysis of 2-D Machining with a Grooved Tool", Trans. NAMRI, Vol. XXIX, 2001, pp. 327-334.
  30. Arsecularatne, J.A. and I.S. Jawahir, “Prediction and Validation of Cutting Forces in Machining with Chip Breaker Tools”, Trans. NAMRI, Vol. XXIX, 2001, pp. 367-374.
  31. Fang, N. and I.S. Jawahir, “Prediction and Validation of Chip Up-curl in Machining Using the Universal Slip-line Model”, Trans. NAMRI, Vol. XXVIII, 2000, pp. 137-142.
  32. Jawahir, I.S., R. Ghosh, P.X. Li and A.K. Balaji, “Predictability of Tool Failure Modes in Turning with Complex Grooved Tools Using Equivalent Toolface (ET) Model”, J. Wear, Vol. 244, 2000, pp. 94-103.
  33. Jawahir, I.S. and A.K. Balaji, “Predictive Modeling and Optimization of Turning Operations with Complex Grooved Tools for Curled Chip Formation and Chip Breaking”, J. Machining Science & Technology, Vol. 4(3), 2000, pp. 399-443.
  34. Balaji, A.K., G. Sreeram, I.S. Jawahir and E. Lenz, “The Effects of Cutting Tool Thermal Conductivity on Tool-Chip Contact length and Cyclic Chip Formation in Machining with Grooved Tools”, Annals of the CIRP, Vol. 48(1), 1999, pp. 33-38.
  35. Jawahir, I.S., O.W. Dillon, A.K. Balaji, M. Redetzky and N. Fang, “Predictive Modeling of Machining Performance in Turning Operations”, J. Machining Science & Technology, Vol. 2(2), 1998, pp. 253-276.
  36. van Luttervelt, C.A., T.H.C. Childs, I.S. Jawahir, F. Klocke and K. Venuvinod Patri, “Present Situation and Future Trends in Modeling of Machining Operations”, Annals of the CIRP, Vol. 47(2), 1998, pp. 587-626. 
  37. Ganapathy, B.K. and I.S. Jawahir, "Modeling the Chip-Work Contact Force for Chip Breaking in Orthogonal Machining with a Flat-Faced Tool”, ASME J. Manufacturing Science & Engineering, Vol. 120, 1998, pp. 49-56.
  38. Ghosh, R., O.W. Dillon and I.S. Jawahir, “An Investigation of 3-D Curled Chip in Machining - Part 1: A Mechanics-Based Analytical Model”, J. Machining Science & Technology, Vol. 2(1), 1998, pp. 91-116.
  39. Ghosh, R., O.W. Dillon and I.S. Jawahir, “An Investigation of 3-D Curled Chip in Machining - Part 2: Simulation and Validation Using FE Techniques”, J. Machining Science & Technology, Vol. 2(1), 1998, pp. 117-145.
  40. Da, Z.J., J.P. Sadler and I.S. Jawahir, “A New Performance-Based Criterion for Optimum Cutting Conditions and Cutting Tool Selection in Finish Turning”, Trans. NAMRI, Vol. XXVI, 1998, pp. 129-134.
  41. Da, Z.J., J.P. Sadler and I.S. Jawahir, “Predicting Optimum Cutting Conditions for Turning Operations at Varying Tool-wear States”, Trans. NAMRI, Vol. XXV, 1997, pp. 75-80.
  42. Fang, X.D. and I.S. Jawahir, “An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking”, Annals of the CIRP, Vol. 45(1), 1996, pp. 53-58.
  43. Fang, X.D., J. Fei and I.S. Jawahir, " A Hybrid Algorithm for Predicting Chip-form/Chip Break-ability in Machining", Int. J. Machine Tools & Manufacture, Vol. 36, No. 10, 1996, pp. 1093-1107.
  44. Wang, L., K. Saito and I.S. Jawahir, "Infrared Temperature Measurement of Curled Chip Formation in Metal Machining", Trans. NAMRI, Vol. XXIV, 1996, pp. 87-92.
  45. Li, P.X., I.S. Jawahir, X.D. Fang and E.L. Exner, "Chip-groove Effects on Concurrently Occurring Multiple Tool-wear Parameters in Machining with Complex Grooved Tools", Trans.NAMRI, Vol. XXIV, 1996, pp. 33-38.
  46. Ouyang, J.F. and I.S. Jawahir, "Ball Array Calibration Using a Gage Block", Int. J. Measurements, Vol. 16, 1995, pp. 219-229.
  47. Jawahir, I.S., P.X. Li, R. Ghosh and E.L. Exner, "A New Parametric Approach for the Assessment of Comprehensive Tool-wear in Coated Grooved Tools", Annals of the CIRP, Vol. 44(1), 1995, pp. 49-54.
  48. Jawahir, I.S. and X.D. Fang, "A Knowledge-based System for Designing Effective Chip Breakers for 2-D and 3-D Chip Curl and Chip Breaking", Int. J. Advanced Manufacturing Technology, Vol. 10, 1995, pp. 225-239.
  49. Jawahir, I.S. and J.P. Zhang, "An Analysis of Chip Curl Development, Chip Deformation and Chip Breaking in Orthogonal Machining", Trans. NAMRI, Vol. XXIII, 1995, pp. 109-114.
  50. Jawahir, I.S., R. Ghosh, X.D. Fang and P.X. Li, "An Investigation of the Effects of Chip Flow on Tool-wear in Machining with Complex Grooved Tools", J. Wear, Vol. 184, 1995, pp. 145-154.
  51. Fang, X.D. and I.S. Jawahir, "Predicting Total Machining Performance in Finish Turning Using Integrated Fuzzy-Set Models of the Machinability Parameters", Int. J. Production Research, Vol. 32(4), 1994, pp. 833-849.
  52. Jawahir, I.S. and C.A. van Luttervelt, "Recent Developments in Chip Control Research and Applications", Annals of the CIRP, Vol. 42 (2), 1993, pp. 659-693.
  53. Jawahir, I.S. and J. Fei, "A Comprehensive Evaluation of Tool Inserts for Chip Control Using Fuzzy Modeling of Machinability Parameters", Trans. NAMRI, Vol. XXI, 1993, pp. 205-212.
  54. Fang, X.D. and I.S. Jawahir, "The Effects of Progressive Tool-wear and Tool restricted Contact on Chip Breakability in Machining", J. Wear, Vol. 160, 1993, pp. 243-252.
  55. Jawahir, I.S., N.U. Qureshi, and J.A. Arsecularatne, "On the Interrelationships of Some Machinability Parameters in Finish Turning", Int. J. Machine Tools and Manufacture, Vol. 32(5), 1992, pp. 709-723.
  56. Jawahir, I.S., "An Investigation of Three-dimensional Chip Flow in Machining of Steels with Grooved Chip Forming Tool Inserts", Trans. NAMRI, Vol. XIX, 1991, pp. 222-231.
  57. Islam, M.N., I.S. Jawahir, and I.J. Kirby, "A CMM-based Geometric Accuracy Study of CNC Drilling Operations", ME Trans., IEAust., Vol. ME 16(2), 1991, pp. 141-148.
  58. Fang, X.D. and I.S. Jawahir, "On Predicting Chip Breakability in Machining of Steels with Carbide Tool Inserts Having Complex Chip Groove Geometries", J. Materials Processing Technology, Vol. 28, 1991, pp. 37-47.
  59. Jawahir, I.S., "On the Controllability of Chip breaking Cycles and Modes of Chip Breaking in Metal Machining", Annals of the CIRP, Vol. 39(1), 1990, pp. 47-51. 
  60. Yao, Y., I.S. Jawahir, D. Jamieson and X.D. Fang, "Computer Animation of Chip Flow and Chip Curl in an Expert Process Planning System for Metal Machining", Trans. NAMRI, Vol. XVIII, 1990, pp. 161-166.
  61. Jawahir, I.S., "A Survey and Future Predictions for the Use of Chip Breaking in Unmanned Systems", Int. J. Advanced Manufacturing Technology, Vol. 3(4), 1988, pp. 87-104.
  62. Jawahir, I.S., "The Chip Control Factor in Machinability Assessments: Recent Trends", J. Mechanical Working Technology, Vol. 17, 1988, pp. 213-224.
  63. Jawahir, I.S., "The Tool Restricted Contact Effect as a Major Influencing Factor in Chip Breaking: An Experimental Analysis", Annals of the CIRP, Vol. 37(1), 1988, pp. 121-126.

Journal Papers Accepted for Publication 

  1. Poulachon, G., A. Moisan and I.S. Jawahir, “Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property Data”, ASME J. Manufacturing Science and Engineering.
  2. Wanigarathne, P., K.C. Ee and I.S. Jawahir, “MQL Applications in Turning of AISI 4140 Alloy Steel: A Comparison of Machining Performance with Flood Cooling and Dry Machining for Sustainability”, Int. J. Machine Tools and Manufacture.
  3. Ee, K.C., P.X. Li, A.K. Balaji and I. S. Jawahir, “Performance-based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 1 – Tool-wear/Tool-life in Turning with Coated Grooved Tools”, J. Manufacturing Processes.
  4. Balaji, A.K., R. Ghosh, X.D. Fang, R. Stevenson and I.S. Jawahir, “Performance-based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 2 – Assessment of Chip-forms/Chip Breakability”, J. Manufacturing Processes.
  5. Wang, X., Z.J. Da, A.K. Balaji and I.S. Jawahir, “Performance-based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 3 – Optimum Cutting Conditions and Selection of Cutting Tools”, J. Manufacturing Processes.
  6. Jawahir, I.S., N. de Silva and J. Liew, “A New, Comprehensive Method for Measurement and Quantification of Product Sustainability”, Int. J. Product Development (Special Issue on Sustainable Product and Services Design), InderScience Publishers, United Kingdom.
  7. Jawahir, I.S., K.E. Rouch, O.W. Dillon, Jr., L. Holloway, A. Hall and J. Knuf, “Design for Sustainability (DFS): New Challenges in Developing and Implementing a Curriculum for Next Generation Design and Manufacturing Engineers”, Int. J. Engineering Education, 2005.
  8. Jawahir, I.S. and X. Wang, “Development of Hybrid Predictive Models and Optimization Techniques for Machining Operations”, J. Mat. Processing Technology, 2006.

(d) Refereed Conference Papers 

 Published Papers in Refereed Conference Proceedings 

  1. Jawahir, I.S. and X. Wang, “Recent Advances in Plasticity Applications in Metal Machining: Slip-line Models for Machining with Rounded Cutting Edge Restricted Contact Grooved Tools”, (Keynote Paper), Int. Conf. on Advances in Materials Processing Technologies, Las Vegas, Nevada, July 31 – August 3, 2006.
  2. Dillon, O.W., K.C. Ee, P.C. Wanigarathne, I.S. Jawahir and J.C. Outeiro “Residual Stresses Generated in Orthogonal Machining”, Proceedings of PLASTICITY ’06: The Twelfth International Symposium on Plasticity and its Current Applications, Halifax, Nova Scotia, Canada, July 2006.
  3. N. de Silva, I. S. Jawahir, O.W. Dillon, Jr. and M. Russell, “A New Comprehensive Methodology for the Evaluation of Product Sustainability at the Design and Development Stage of Consumer Electronic Products”, Proc. 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, June 2006, pp.335-340.
  4. Dillon, O.W., Jr., K.C. Ee, P.C. Wanigarathne, I.S. Jawahir and J.C. Outeiro, “Temperatures and Residual Stresses in Orthogonal Machining”, Proc. 9th International Conference on Material Forming ESAFORM, Glasgow, United Kingdom, April 26-28, 2006, pp. 603-606.
  5. Outeiro, J.C., K.C. Ee, O.W. Dillon, Jr., P.C. Wanigarathne and I.S. Jawahir, “Some Observations on Comparing the Modelled and Measured Residual Stresses on the Machined Surface Induced by Orthogonal Cutting of AISI 316L Steel”, Proc. 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, May 11-12, 2006, pp. 475-481.
  6. Liew, J., O.W. Dillon, Jr., K.E. Rouch, S. Das and I.S. Jawahir, “Innovative Product Design Concepts and a New Methodology for Sustainability Enhancement in Aluminum Beverage Cans”, Proc. 4 th International Conference on Design and Manufacture for Sustainable Development, New Castle Upon Tyne, United Kingdom, July 2005.
  7. Jawahir, I.S., K.E. Rouch, O.W. Dillon, Jr., L. Holloway, A. Hall and J. Knuf, “Design for Sustainability (DFS): New Challenges in Developing and Implementing a Curriculum for Next Generation Design and Manufacturing Engineers”, Proc. CIRP Int. Manufacturing Engineering Education Conference and 3 rd SME Int. Conference on Manufacturing Engineering Education, Cal Poly State University, San Luis Obispo, CA, June 2005, pp. 59-71.
  8. Wanigarathne, K.C. Ee, G. Poulachon, O.W. Dillon, Jr., G. Poulachon and I.S. Jawahir, “The Effects of Tool Coatings and Flood Cooling on the Thermal Field Developed in Orthogonal Machining: Finite Element Modeling and Metallurgical Analysis”, Proc. 8th CIRP Int. Workshop on Modeling of Machining Operations, Chemnitz, Germany, May 2005, pp. 415-422.
  9. Wanigarathne, P.C., A.D. Kardekar, O. W. Dillon, Jr., G. Poulachon and I. S. Jawahir, “Progressive Tool-wear in Machining with Coated Grooved Tools and Its Correlation with Cutting Temperature”, Proc. 15 th Int. Conf. on Wear of Materials (WOM), San Diego, CA, April 2005.
  10. Head, D., S. Chen, M. Effgen and I.S. Jawahir, “Prediction of Sustained Surface Quality in Contour Face Turning of Porous Tungsten with Diamond Cutting Tools”, Proc.Int. Conference on Hard Materials, Puerto Rico, November 2004, CD-ROM.
  11. Wanigarathne, P.C., J. Liew, X. Wang, O. W. Dillon, Jr. and I. S. Jawahir, “Assessment of Process Sustainability for Product Manufacture in Machining Operations”, Proc. Global Conf. on Sustainable Product Development and Life Cycle Engineering, Berlin, Germany, September 2004., pp. 305-312.
  12. Jawahir, I.S. and P.C. Wanigarathne, “New Challenges in Developing Science-based Sustainability Principles for Next Generation Product Design and Manufacture”, (Keynote Paper), Proc. TMT 2004, Neum, B & H, September 2004, pp. 1-10.
  13. Wang, X., A. Kardekar and I.S. Jawahir, “Performance-based Optimization of Face Milling Operations using Genetic Algorithms”, Proc. 4 th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2004), July 2004, Sorrento, Italy, pp. 371-376.
  14. Ee, K.C., O.W. Dillon, Jr. and I.S. Jawahir, “A Discussion of the Implications of Different Boundary Conditions in Finite Element Modeling of Machining Process”, Proc. NUMIFORM, Columbus, OH, July 2004.
  15. Jawahir, I.S. and X. Wang, “Development of Hybrid Predictive Models and Optimization Techniques for Machining Operations”, (Keynote Paper), Proc. 3 rd Int. Conf. on Advanced Manufacturing Technology (ICAMT 2004), Kuala Lumpur, Malaysia, May 2004, pp. K18-K32.
  16. Ee, K.C., O.W. Dillon, Jr. and I.S. Jawahir, “An Analysis of the Effects of Chip-groove Geometry on Residual Stress Formation in Machining using Finite Element Methods”, Proc. 7th CIRP Int. Workshop on Modeling of Machining Operations, ENSAM, Cluny, France, May 2004, pp. 267-274.
  17. Wanigarathne, P., D. Troutman, A.D. Kardekar, K.C. Ee, G. Poulachon, O.W. Dillon, Jr. and I.S. Jawahir, “An Experimental Study of Cutting temperatures and Progressive Tool-wear in Orthogonal machining with Grooved Tools”, Proc. 7th CIRP Int. Workshop on Modeling of Machining Operations, ENSAM, Cluny, France, May 2004, pp. 179-188.
  18. Chen, S., D. Head, M. Effgen and I.S. Jawahir, “An Investigation of Machining Performance for Controlled Surface Quality Requirements in Porous Tungsten”, Proc. 5 th IEEE Int. Conf. on Vacuum Electronics, Monterey, CA, April 2004, pp. 358-359.
  19. Balaji, A.K. and I.S. Jawahir, “Variable Tool-Chip Contact and Chip Morphology in Machining with Grooved Tools: A tribological Perspective”, Proc. Tribology in Environmental Design (TED 2003), Bournemouth, United Kingdom, September 2003, pp. 311-323. 
  20. Wanigarathne, P.C., K.C. Ee and I.S. Jawahir, “Near-Dry Machining for Environmentally Benign Manufacturing: A Comparison of Machining Performance with Flood Cooling and Dry Machining, Proc. 2nd International Conference on Design and Manufacture for Sustainable Development, Cambridge, United Kingdom, September 2003, pp. 39-48.
  21. Ee, K.C., O.W. Dillon, Jr. and I.S. Jawahir, “Finite Element Modeling of Residual Stresses in Machining Induced by Cutting Tool with a Finite Edge Radius”, Proc. 6 th CIRP Int. Workshop on Modeling of Machining Operations, McMaster University, Hamilton, ON, Canada, May 2003, pp. 101-112.
  22. M.S. Fofana, K.C. Ee and I.S. Jawahir, “Machining Stability in Turning Operations when Cutting with a Progressively Worn Tool Insert”, Proc. 14 th Int. Conf. on Wear of Materials (WOM), Washington, DC, March 2003.
  23. Ee, K.C., A.K. Balaji and I.S. Jawahir, “Progressive Tool-wear Mechanisms and their Effects on Chip Curl/Chip-form in Machining with Grooved Tools: An Extended Application of the Equivalent Toolface (ET) Model”, Proc. 14 th Int. Conf. on Wear of Materials (WOM), Washington, DC, March 2003.
  24. Wang, X. and I.S. Jawahir, “Prediction of Tool-Chip Interface Friction and the Chip-groove Effects in Machining with Restricted Contact Grooved Tools Using the Universal Slip-line Model”, Proc. 6th Asia – Pacific Symposium on Engineering Plasticity and Its Applications, Sydney, Australia, December 2002, Vol. 2, pp. 469-476.
  25. Cao, Q., K.C. Ee, O.W. Dillon, Jr. and I.S. Jawahir, “A Finite Element Analysis of Void Evolution in 2-D Machining”, Proc. ASME Symp. on Advances in Damage Mechanics: Constitutive Modeling of Damage Mechanics, IMECE 2002, New Orleans, LA, November 2002, CD-ROM.
  26. Poulachon, G., I.S. Jawahir, P. Jacquet, S. Pheulpin and E. Seguin,“Effect of Work Material Microstructure on the PCBN Tool-wear in Hard Turning”, Proc. 5 th Int. Conf. on the Behavior of Materials in Machining, Chester, United Kingdom, November 2002, pp. 13-16.
  27. Poulachon, G., A. Moisan and I.S. Jawahir, “ Microstructure and Properties in Machining of 100Cr6 Steels”, Materials 2002 Int. Conference, Palais des Congres, le Vinci, Tours, October 2002.
  28. Wang, X. and I.S. Jawahir, “Web-Based Optimization of Milling Operations for the Selection of Cutting Conditions and Cutting Tools Using Genetic Algorithms”, Proc. 3 rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2002), Ischia, Italy, July 2002, pp. 237-242.  
  29. Jawahir, I.S., S. Chen, D. Troutman, B. Allison and G. Poulachon, “Dry Machining of Cast Aluminum Wheels: Innovative Cutting Tool Design for Improved Machining Performance and Environmentally Conscious Manufacturing”, Proc. 1 st Int. Conf. On Design for Manufacture and Sustainable Development, Liverpool, United Kingdom, June 2002, pp. 219-238.
  30. Poulachon, G., I.S. Jawahir, P. Jacquet, S. Pheulpin and E. Seguin, “PCBN Tool-wear in Hard Turning of Various Work Materials”, Proc. Int. Conf. on Integrated Design and Manufacturing in Mechanical Engineering, IFMA, Clermont-Ferrand, France, May 2002, Kluwer Academic Publishers, 2002, pp. 231-240.
  31. Poulachon, G., A. Moisan and I.S. Jawahir, “Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property Data”, Proc. ASME Symposium on Fundamental Issues in Machining, IMECE 2001, New York, USA, November 2001, CD-ROM.
  32. Wang, X., A.K. Balaji and I.S. Jawahir, “Optimization of Multi-pass Turning Operations Using Genetic Algorithms for the Selection of Cutting Conditions and Cutting Tools with Tool-wear Effect”, Proc. 9 th IFSA World Congress and 20 th NAFIPS International Conference, Vancouver, Canada, July 2001, Vol. 5, pp. 3193-3200.
  33. Rossi, F., E. Sermet, G. Poulachon, O.W. Dillon, K. Saito and I.S. Jawahir, “Numerical and Experimental Studies on Temperature Distribution in Machining with Flat-faced and Grooved Tools”, Proc. ESAFORM, Univ. of Leige, Belgium, April 2001, pp. 615-618.
  34. Poulachon, G., A. Moisan and I.S. Jawahir, “Tool-wear Mechanisms in Hard Turning with Polycrystalline Cubic Boron Nitride Tools”, Proc. 13 th Int. Conf. on Wear of Materials, Vancouver, BC, Canada, April 2001, CD-ROM.
  35. Poulachon, G., D. Dessoly, C. Le Calvez, J.L. Lebrun, V. Prunet and I.S. Jawahir, “An Investigation of the Influence of Sulphide Inclusions on Tool-wear in High Speed Milling of Tool Steels”, Proc. 13 th Int. Conf. on Wear of Materials, Vancouver, BC, Canada, April 2001, CD-ROM.
  36. Fang, N. and I.S. Jawahir, “Prediction of Chip Back-flow Angle in Machining with Restricted Contact Grooved Tools”, Proc. ASME, (IMEC 2000), MED Vol. 11, 2000, pp. 891-898.
  37. Jawahir, I.S. and A.K. Balaji, “Predictive Modeling and Optimization of Turning Operations with Complex Grooved Tools for Curled Chip Formation and Chip Breaking”, Proc. 3 rd CIRP Int. Workshop on Modeling of Machining Operations, Sydney, Australia, August 2000, pp. 41-59.
  38. Jawahir, I.S., A.K. Balaji, K.E. Rouch and J.E. Baker, “Towards Integration of Hybrid Models for Optimized Machining Performance in Intelligent Machining Systems”, Proc. Int. Manufacturing Conf. in China (IMCC 2000), Hong Kong, August 2000, CD-ROM.
  39. Balaji, A.K. and I.S. Jawahir, “Contour Turning of Aluminum Alloys with PCD Flat-faced Diamond Coated Grooved Tools”, Proc. 2 nd International Seminar on Improving Machine Tool Performance, La Baule, France, July 2000, Paper C-17, CD-ROM.
  40. Wang, X., Z.J. Da, A.K. Balaji and I.S. Jawahir, “Performance-Based Optimal Selection of Cutting Conditions and Cutting Tools in Multi-Pass Turning Operations Using Genetic Algorithms”, Proc. 2 nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2000), Capri, Italy, June 2000, pp. 409-414.
  41. Balaji, A.K. and I.S. Jawahir, “Variable Tool-Chip Interfacial Friction in 2-D and 3-D Machining Operations”, Proc. International Workshop on Friction and Flow Stress in Cutting and Forming, ENSAM, Paris, France, January 2000, pp. 91-100.
  42. Balaji, A.K. and I.S. Jawahir, “The Effect of Cutting Parameters on Chip Side-curl Mechanisms and Variable Tool-Chip Contact in Turning”, Proc. ASME Symposium, Nashville, TN, MED-Vol. 10, Manufacturing Science and Engineering, 1999, pp. 311-318.
  43. Redetzky, M., A.K. Balaji and I.S. Jawahir, “Predictive Modeling of Cutting Forces and Chip Flow in Machining with Nose Radius Tools”, Proc. 2nd CIRP Int. Workshop on Modeling of Machining Operations, Nantes, France, January 1999, pp. 160-180.
  44. Da, Z.J. and I.S. Jawahir, “Optimal Chip Control in Turning Operations”, Proc. Int. Seminar on Improving Machine Tool Performance, San Sebastian, Spain, July 1998, pp. 607-620.
  45. Lin, M., Z.J. Da and I.S. Jawahir, “Development and Implementation of Rule-Base Algorithms in CAPP Systems for Predicting Chip Breakability in Machining”, Proc. CIRP Int. Seminar on Intelligent Computation in Manufacturing Engineering, (Editor: R. Teti), Capri, Italy, July 1998, pp. 517-522.
  46. Jawahir, I.S., O.W. Dillon, A.K. Balaji, M. Redetzky and N. Fang, “Predictive Modeling of Machining Performance in Turning Operations”, Proc. CIRP Int. Workshop on Modeling of Machining Operations, Atlanta, GA, May 1998, pp. 161-176.
  47. Jawahir, I.S., A.K. Balaji, R. Stevenson and C.A. van Luttervelt, “Towards Predictive Modeling and Optimization of Machining Operations”, Proc. ASME Symposium, MED-Vol. 6-2 (Volume 2), Dallas, TX, November 1997, pp. 3-12. 
  48. Li, P.X., D. Stein, R. Ghosh and I.S. Jawahir, “Engaged Cutting Edge Effects on Tool-wear and Tool-life in Turning Operations Using Grooved Cutting Tools”, Proc.ASME Symposium, MED-Vol. 6(2), Dallas, TX, November 1997, pp. 277-284. 
  49. Da, Z.J., M. Lin, R. Ghosh and I.S. Jawahir, “Development of an Intelligent Technique for Predictive Assessment of Chip Breaking in Computer-aided Process Planning of Machining Operations”, Proc. Int. Manufacturing and Materials Processing (IMMP), Gold Coast, Australia, July 1997, pp. 1311-1320.
  50. Da, Z. and I.S. Jawahir, “Computer-aided Optimization of Turning Operations for Varying Tool-wear States”, Proc. Int. CAD/CAM Seminar, Bandung, Indonesia, July 1997, pp. B16.1-16.15.
  51. Ghosh, R., M. Redetzky, A.K. Balaji and I.S. Jawahir, “The Equivalent Toolface (ET) Approach for Modeling Chip Curl in Machining with Grooved Tools”, Proc. Canadian Society of Mechanical Engineers/SCGM, Hamilton, ON, Canada, May 1996, pp. 702-711.
  52. Da, Z.J., J.P. Sadler and I.S. Jawahir, “Multiple Criteria Optimization of Finish Turning Operations Based on a Hybrid Model”, Proc. ASME Design Engineering Technical Conference and Computers in Engineering Conference, Paper No. 96-DETC/DAC-1105, Irvine, CA, August 1996.
  53. Wang, L., K. Saito and I.S. Jawahir, “Detection of Chip Boundaries of Infrared Measurements in Metal Machining Using Image Processing Techniques”, Proc. International Manufacturing Engineering Conference, (Ed: I.D. Marinescu), August 1996, pp. 98-101. 
  54. Wang, L., K. Saito and I.S. Jawahir, “An Analytical Solution and Infrared Experimental Verification for Temperature Distributions within Curled Chips in Orthogonal Machining”, 2 nd S.M. Wu Symposium on Manufacturing Sciences, Shanghai, China, June 1996.
  55. Wang, L., K. Saito and I.S. Jawahir, “Temperature Distributions within a Curled Chip and Cutting Tool in Orthogonal Machining”, Proc. Fourth Asian Symp. on Visualization, Beijing, China, May 1996, pp. 465-470.
  56. Ghosh, R., M. Lin, I.S. Jawahir, R.P. Khetan and P. Bandyopadhyay, " Chip Breakability Assessment Using a Chip-groove Classification System in Finish Turning", Proc. ASME Int. Mech. Eng. Congress, MED-Vol. 2-1, San Francisco, November 1995, pp. 679-702.
  57. Um, Jae-Yong, L.C. Chow and I.S. Jawahir, "An Experimental Investigation of the Application of the Spray Cooling Method in Stainless Steel Machining Proc. ASME Int. Mech. Eng. Congress, MED-Vol. 2-1, San Francisco, November 1995, pp. 165-178.
  58. Da, Z.J., J.P. Sadler, X.D. Fang and I.S. Jawahir, "Optimum Machining Performance in Finish Turning with Complex Grooved Tools", Proc. ASME Int. Mech. Eng. Congress, MED-Vol. 2-1, San Francisco, November 1995, pp. 703-714.
  59. Fei, J. and I.S. Jawahir, "A New Approach for Chip-form Characterization in Metal Machining", Proc. NAMRC, 1994, pp. 11-17. 
  60. Ghosh, R., X.D. Fang and I.S. Jawahir, "Estimation of Chip Side-flow in Machining with Complex Grooved Tools Using a Force Ratio Method", In: The Physics of Machining Processes II, D.A. Stephenson and R. Stevenson (Eds.), TMS/ASME Publications, 1994, pp. 233-255.
  61. Ganapathy, B. and I.S. Jawahir, "A Force Model for Chip Breaking in Orthogonal Machining", Proc. ASME Conference (WAM-94), New Orleans, LA, PED - Vol. 64, Manufacturing Science and Engineering, 1993, pp. 461-474. 
  62. Fei, J. and I.S. Jawahir, "A Fuzzy Classification System for Chip Breakability Assessments in Machining", Proc. 2nd IEEE Int. Conf. Fuzzy Systems, San Francisco, CA, March 1993, pp. 1275-1280.
  63. Fei, J. and I.S. Jawahir, "A Fuzzy Knowledge-based System for Predicting Surface Roughness in Finish Turning", Proc. IEEE Int. FUZZ-IEEE Conf., San Diego, CA, March 1992, pp. 899-906.
  64. Fei, J., X.D. Fang and I.S. Jawahir, "Towards a Fuzzy Set-based Optimization of Finish Turning Operations", Proc. Int. Conference on Fuzzy Systems and Intelligent Controls, Louisville, KY, March 1992, pp. 28-36.
  65. Fang, X.D. and I.S. Jawahir, "On Predicting Chip Breakability in Machining of Steels with Carbide Tool Inserts Having Complex Chip Groove Geometries", Proc. 7th Int. Conf. on Computer-Aided Production Engineering (Editors: V.C. Venkatesh and J.A. McGeough), Cookeville, TN, August 1991, pp. 37-47.
  66. Jawahir, I.S. and X.D. Fang, "Some Guidelines on the Use of a Predictive Expert System for Chip Control in Automated Process Planning", Proc. 5th Int. Conference on Manufacturing Engineering, Vol. 1, Wollongong, Australia, July 1990, pp. 288-292.
  67. Kosasih, P.B., I.S. Jawahir and W.J. Plumbridge, "On Machinability Assessments in Turning Operations with Coated and Uncoated Carbide Tool Inserts Having Controlled Chip Groove Geometry", Proc. 5th Int. Conference on Manufacturing Engineering, Vol. 1, Wollongong, Australia, July 1990, pp. 143-148.
  68. Islam, M.N., I.S. Jawahir and I.J. Kirby, "A CMM-based Geometric Accuracy Study of CNC Drilling Operations", Proc. 5th Int. Conf. on Manufacturing Engineering, Vol. 2, Wollongong, Australia, July 1990, pp. 378-384.
  69. Jawahir, I.S., N. Uddin and C.K. Jun, "Development of Finish Turning Inserts: Present Trends and Future Prospects", In: Surface Engineering, S.A. Meguid (Ed.), Elsevier Publishers, 1990, pp. 678-687.
  70. Fang, X.D. and I.S. Jawahir, "An Expert System Based on Fuzzy Mathematical Model for Chip Breakability Assessments in Automated Machining", Proc. 2nd Int. ASME Conf., (MI'90), Atlanta, Georgia, USA, March 1990, Vol. IV, pp. 31-37.
  71. Jawahir, I.S. and X.D. Fang, "A Knowledge-based Approach for Improved Performance with Grooved Chip Breakers in Metal Machining", Proc. 3rd Int. Conf. on Advances in Manufacturing Technology, Singapore, August 1989, pp. 130-144.
  72. Jawahir, I.S. and P.L.B. Oxley, "Efficient Chip Breaking at Reduced Power Consumption - An Experimental Analysis", Proc. 4th Int. Conf. on Manufacturing Engineering, Brisbane, Australia, May 1988, pp. 97-102.
  73. Jawahir, I.S. and P.L.B. Oxley, "New Developments in Chip Control Research: Moving Towards Chip Breakability Predictions for Unmanned Manufacture", Proc. 1st ASME Int. Conf., (MI'88), Atlanta, Georgia, USA, April 1988, Vol. 1, pp. 311-320.
  74. Jawahir, I.S., "Technology Transfer for Manufacturing in Developing Countries: Some Aspects", Proc. 3rd Int. Conf. on Manufacturing Engineering (ICME-86), Newcastle, Australia, August 1986. (Proc. Supplement)
  75. Jawahir, I.S. and W.C.K. Wong, "An Integrated Approach to Teaching of Manufacturing Engineering in Less-Developed Countries", Proc. Reg. Conf. on the Role of Engineering Education in Industrial Development, Tokyo, Japan, September 1985, pp. 159-165.
  76. Jawahir, I.S. and W.C.K. Wong, "Transfer of Advanced Manufacturing Technology into Developing Countries: Problems and Prospects for Accelerated Development", (Keynote Paper), Proc. Int. Conf. on Advances in Manufacturing (AIM-84), Singapore, October 1984, IFS Publishers, pp. 1-10.
  77. Jawahir, I.S., "The Manufacturing Scene in PNG", 2nd Int. Conf. on Manufacturing Engineering, Singapore, June 1983.

 

U.S. Patents

  1. Jawahir, I.S., R. Ghosh and M. Lin, "A New Predictive System for Chip Breakability    Assessment in Finish Turning", US Patent 5,941,143, August 24, 1999.
  2. Sadler, JP, I.S. Jawahir and Z.J. DA, "Optimization of Machining with Progressively     Worn Cutting Tools", US Patent 5,903,474, May 11, 1999.
  3. Sadler, JP, I.S. Jawahir and Z.J. DA, "Method of Predicting Optimum Machining          Conditions", US Patent 5,801,963 , September 1, 1998.
  4. Jawahir, I.S., X.D. Fang, P.X. Li and R. Ghosh, "Method of Assessing Tool-life in Grooved Tools", US Patent: 5,689,062, November 18, 1997.
  5. K. E. Rouch, S. Tewani, B. Walcott, T. Massa, R. W. Stephenson and S. Stephens, "Active Vibration Control Device ", US Patent 5,170,103, December 8, 1992.
  6. J. H. Ball, P. N. Sheth and K. E. Rouch, "Damped Dynamic Vibration Absorber", US Patent 4,583,912, 1986.

 

Software Programs

  1.  K. Rouch, "MACHDYN Computer Software - Calculation of Dynamic Response and Stability of Machine Tool Systems, Including Vibration Feedback Control". 
  2. K. Rouch, "TORSHAFT Computer Software - Calculation of Torsional Dynamics of Multi-shaft Systems, Including Gear Flexibility".
  3. K. Rouch, "ROTBRG Computer Software - Calculation of Lateral Dynamics of Rotating Shaft Systems, Including Support Structures".
  4. J. P. Sadler, I. S. Jawahir, Z. J. DA and S. S. Lee, "OFTO Software - Optimization of Finish Turning Operations," U. S. Copyright Registration No.: TXU 767-918.
  5.  I.S. Jawahir, R. Ghosh and M. Lin, "CBET Software - Chip Breakability Evaluation in Turning," U. S. Copyright Registration No.: TXU 765-033.

 

 


Home  |  Contact Us  |  College of Engineering Home  |  UK Home  |  Comments | Site Map

Services | Research | Training for Industry | Academic Programs | About Us | Contact Us


Graphic Version

©Copyright 1997-2008, UK Center for Manufacturing, College of Engineering, University of Kentucky
 An Equal Opportunity University
Visit us on Facebook