Dr. Alan T. Male
Publications

"A Method for the Determination of the Coefficient of Friction of Metals Under Conditions of Bulk Plastic Deformation," J. Inst. Metals, 1964-65, 93, Pg 38-45. (Authors: A. T. Male and M. G. Cockcroft.)

"High Temperature Friction Properties of Metals," Machine Design Eng., October 1964, Pg 59-60. (Author: A. T. Male.)

"The Use of Oxides for High Temperature Lubrication," J. Inst. Metals, 1964-65, 93, Pg 288. (Author: A. T. Male.)

"The Effect of Temperature on the Frictional Behavior of Various Metals During Mechanical Working," J. Inst. Metals, 1964-65, 93, Pg 489-494. (Author: A. T. Male.)

"Variations in Friction Coefficients of Metals During Compressive Deformation," J. Inst. Metals, 1966, 94, Pg 121-125. (Author: A. T. Male.)

"Metal Oxides for High Temperature Lubrication," Pg 200-208 of "Friction and Lubrication in Metal Processing," American Society of Mechanical Engineers, New Orleans, June 1966. (Author: A. T. Male.)

"Frictional Properties of Metal Oxides at High Temperatures," Wear, 1968, 11, Pg 233-238. (Authors: C. F. Hinsley, A. T. Male and G. W. Rowe.)

"The Determination of Coefficients of Friction During Compressive Deformation," Report 8 - Institution of Mechanical Engineers Symposium, "Experimental Methods in Tribology," London, England, March 1968. Proc. Inst. Mech. Eng., 1967-68, 182, Pt.3G, Pg 64-67. (Author: A. T. Male.)

"Effect of Hot Rolling on the Grain-Coarsening Behavior of Steels Containing Aluminum and Nitrogen," J. Iron Steel Inst., May 1969, Pg 598-606. (Authors: M. J. Morgan, G. H. J. Bennett and A. T. Male.)

"The Mathematical Calibration of the Ring Test for Friction Studies in Flat Forging Operations," Proc. 10th Int. Machine Design Res. Conf., 1969, Pg 537-552. Pergamon Press, London, 1969. (Authors: A. T. Male and V. DePierre.)

"The Validity of Mathematical Solutions for Determining Friction from the Ring Compression Test," Trans. ASME, J. Lubr. Technol., July 1970, 92, (2), Pg 389-395. (Authors: Alan T. Male and Vincent DePierre.)

"Lubricants for Extrusion," Amer. Machinist, 1970, 114, (16), Pg 107-108 and (17), Pg 81-82. (Author: A. T. Male)

"The Use of the Ring Compression Test for Defining Realistic Metal Processing Parameters," SAMPE Journal, 1971. 11pp. (Authors: Alan T. Male and Vincent DePierre.)

"A New Method for the Determination of Material Flow Stress Values Under Metalworking Conditions," Metal Forming: Interaction Between Theory and Practice, Plenum Press, 1971, Pg 293-306. (Authors: George Saul, Alan T. Male and Vincent DePierre.)

"Metalworking Lubrication," Proc. ASME Conf., Assessment of Lubrication Technology, Pg 33-37. Boston, MA, June 1972. (Author: Alan T. Male.)

"The Influence of Process Variables on the Pressure Requirements for the Extrusion of Titanium Alloy Rods," Titanium Science and Technology, Vol. 1, Pg 431-439. Plenum Press, 1973. (Authors: F. J. Gurney and A. T. Male.)

"The Influence of Controlled Processing on the Yield Strength and Toughness Properties of Titanium Alloy Extrusions," Titanium Science and Technology, Vol. 3, Pg 1755-1767. Plenum Press 1973. (Authors: Attwell M. Adair, Fred J. Gurney and Alan T. Male.)

"The Effects of Extrusion Process Variables on the Structure and Properties of Titanium Alloys," Titanium Science and Technology, Vol. 3, Pg 1769-1784. Plenum Press, 1973. (Authors: F. J. Gurney and A. T. Male.)

"The Relative Validity of the Concepts of Coefficient of Friction and Interface Friction Shear Factor for Use in Metal Deformation Studies," ASLE Trans., 1973, 16, (3), Pg 177-184. (Authors: Alan T. Male, Vincent DePierre and George Saul.)

"Hot Isostatic Pressing," Proc. 38th Annual Westinghouse Machine Tool Forum, Pittsburgh, PA. May 1974, TP5, 7pp. (Author: Alan T. Male.)

"Hydrostatic Extrusion," Proc. 38th Annual Westinghouse Machine Tool Forum, Pittsburgh, PA. May 1974, TP11, 5pp. (Author: Alan T. Male.)

"Surface Defects in Drawn Aluminum Magnet Wire," Trans. ASME, J. Lubr. Technol., January 1975, Pg 134-141. (Authors: R. N. Wright and A. T. Male.)

"Exotic Processes Turn Out Hard-To-Make Parts," Machine Design, November 14, 1974, Pg 184-185. (Author: Alan T. Male.)

"Surface Defects in Drawn Aluminum Magnet Wire," Wire Industry, July 1975, Pg 522-525. (Authors: R. N. Wright and A. T. Male.)

"Lubrication in Metal Deformation - Extrusion," Pg 18-18 to 18-21, SME Tool & Manufacturing Engineers Handbook 3rd Ed., McGraw-Hill, 1976. (Author: Alan T. Male.)

"Evaluation of Glass Coatings for Forging Lubrication," SME Manufacturing Engineering Trans., 1975-76, Pg 1-19. (Authors: F. J. Gurney and A. T. Male.)

"Die Temperature Effects in Forging Lubrication," SME Manufacturing Engineering Trans., 1975-76, Pg 21-37. (Authors: F. J. Gurney and A. T. Male.)

"The Influence of Interfacial Shear Yield Strength on the Deformation Mechanics of an Axi-Symmetric Two Component System," Proc. 5th North American Metalworking Research Conference, 1977, Pg 105-113. (Authors: R. Lugosi, C. S. Hartley and A. T. Male.)

"Effect of Interface Reactions on Properties of HfC-Coated SiC Fiber/ Superalloy Matrix Composites," Proc. Soviet-American Symposium on Problems of Electrometallurgy and Welding. Kiev, USSR. September 1977. (Authors: J. A. Cornie, W. R. Lovic and A. T. Male.)

"Effect of Interface Reactions on Properties of HfC-Coated SiC Fiber/Superalloy Matrix Composites," Proc. TMS-AIME/ASM Symposium, Failure Modes in Composites IV, 1977, Pg 236-264. (Authors: J. A. Cornie, W. R. Lovic and A. T. Male.)

"Lubrication Effects During the Hydrostatic Extrusion of Aluminum Wire," Proc. 6th North American Metalworking Research Conference, 1978, Pg 127-132. (Authors: R. Lugosi and A. T. Male.)

"Surface Defect Development During Hydrostatic Extrusion of Aluminum Wire," Proc. 6th North American Metalworking Research Conference, 1978, Pg 133-137. (Authors: R. Lugosi and A. T. Male.)

"The Plastic Indentation of Aluminum With Circular Punches," Proc. 7th North American Metalworking Research Conference, 1979, Pg 145-150. (Author: A. T. Male.)

"Evaluation Procedures and Processing Effects in Diffusion Bonding 304 Stainless Steel," Proc. 8th North American Manufacturing Research Conference, 1980, Pg 214-222. (Authors: C. S. Cook and A. T. Male.)

"Solid State Bonding of a Cobalt Hard Facing Alloy to Stainless Steel," Proc. 10th North American Manufacturing Research Conference, 1982, Pg 239-244. (Authors: C. S. Cook and A. T. Male.)

"Operating Experience with a Research Hot Isostatic Press," Proc. ASME Conf. on High Pressure Engineering and Technology for Pressure Vessels and Piping Systems, 1982, Pg 9-19. (Authors: C. S. Cook, W. R. Lovic and A. T. Male.)

"Plastic Deformation Analysis of Strain-Rate Sensitive Materials Under Plane Strain Conditions," Int. J. Mech. Sci., 1983, 25, (4), Pg 251-263. (Authors: S. Y. Lee and A. T. Male.)

"Hot Workability-Microstructure Relationship in a Cr-Ni Steel," J. Mech. Working Technol., June 1983, 8, (1), Pg 71-86. (Authors: N. C. Iyer and A. T. Male.)

"Hot Compression Testing," Chapter 4, Pg 51-94, Workability Testing Techniques, Amer. Soc. Metals, 1984. (Authors: A. T. Male and G. E. Dieter.)

"Role of Process Parameters in Dynamic Compaction," Proc. 8th ASME Conf. on High Energy Rate Fabrication Processes, June 1984, San Antonio, TX. (Authors: N. C. Iyer, A. T. Male and D. A. Fikse.)

"Role of Powder Morphology in Dynamic Compaction," Progress in Powder Metallurgy, 1986, 41, Pg 641-652. (Authors: N. C. Iyer, W. R. Lovic and A. T. Male.)

"Superconducting Microparticle Composite Wire," Proc. 1986 ASC, IEEE Trans. Mag., March 1987, 23, (2), Pg. 1372-1376. (Authors: A. I. Braginski and A. T. Male.)

"Defects at Interfaces in Co-Extruded Metals," Proc. Int. Conf. on Computational Methods for Predicting Material Processing Defects, Cachan, France, September 1987. (Authors: Craig S. Hartley, Mohamed Dehghani, Natraj C. Iyer and Alan T. Male.)

"Impact of High Temperature Superconductors on Pulse Power Systems," Proc. 1988 ASC, IEEE Trans. Mag., March 1989, 25, (2), Pg. 1787-?. (Authors: S. K. Singh, J. H. Murphy, P. W. Eckels, C. J. Mole, A. T. Male and C. K. Jones.)

"Silver Encased High Temperature Superconductor Ribbons Produced by Rolling," Proc. 1988 ASC, IEEE Trans. Mag., March 1989, 25, (2), Pg. 2317-2319. (Authors: G. A. Whitlow, N. C. Iyer, A. T. Male, J. C. Powell and G. R. Wagner.)

"Magnetoresistance: The Hall Effect in Composite Aluminum Cryoconductors," Cryogenics, Vol. 29, No. 7, July 1989, Pg. 748-752. (Authors: P. W. Eckels, N. C. Iyer, A. Patterson, A. T. Male, J. H. Parker Jr. and J. W. Coltman.)

"High Temperature Deformation Behavior of Cast Alloy 718," Superalloys 718, 625, 706 and Derivatives, 1997, Pittsburgh, PA. (Authors: D. Zhao, S. Guillard and A. T. Male.)

"A Biomechanical Study on Dental Implant Bridges in a Robot System," Proc. 5th Nat. Applied Mechanisms and Robotics, 1997, Pg. AMR 97-0A3-001-008. (Authors: J. P. Sadler, L. Wang, K. Saito, A. T. Male and L. C. Breeding.)

"Flexible Forming of Sheet Metal Using Plasma Arc," Sheet Metal 1999, Proceedings of the International Conference, 27-28 September, 1999, Pg. 555-560. Erlangen, Germany. (Authors: A. T. Male, P. J. Li, Y. W. Chen and Y. M. Zhang.)

"Flexible Forming of Sheet Metal Using Plasma Arc," MED-Vol. 10, Manufacturing Science and Engineering - 1999, ASME 1999, Pg. 935-940. (Authors: YiWei Chen, PengJiu Li, Alan T. Male and YuMing Zhang.)

"Flexible Forming of Sheet Metal Using a Plasma Arc," Proc. Instn. Mech Engrs., Vol. 214, Part B, Pg. 117-125. (Authors: P. J. Li, Y. W. Chen, A. T. Male and Y. M. Zhang.)

"Solidification Behavior of Al-Mg Aluminum Alloy Using Double-Sided Arc Welding Process," J. Materials Science Letters, Vol. 19 (2000), Pg. 831-833. (Authors: Y. M. Zhang, C. Pan and A. T. Male.)

"Material Properties in Plasma-Jet Forming Process," Sheet Metal 2000, Proceedings of the 8th International Conference, 17th-19th April, 2000, Pg. 371-380. Birmingham, England. (Authors: A. T. Male, Y. W. Chen, P. J. Li and Y. M. Zhang.)

"Modeling and Control of Plasma-Jet Forming Process," Transactions of 28th North American Manufacturing Research Institution of SME, Vol. XXVIII, 2000, Pg. 39-44. (Authors: A. T. Male, Y. W. Chen, P. J. Li and Y. M. Zhang.)

"Plasma-Jet Forming of Sheet Metal Shapes," Proceedings of International Symposium on Materials Science and Technology, ISMST 2000, Harbin, China. J. Materials Science & Technology, Vol. 17, (1), Jan. 2001, Pg. 115-116. (Authors: A. T. Male, Y. W. Chen, P. J. Li, C. Pan and Y. M. Zhang.)

"Processing Effects in Plasma Forming of Sheet Metal," CIRP Annals 2000, Manufacturing Technology. Vol. 49/1/2000, Pg. 213-216. (Authors: A. T. Male, C. Pan, Y. W. Chen, P. J. Li and Y. M. Zhang.)

"Improved Microstructures and Properties of 6061 Aluminum Alloy Weldments Using Double-Sided Arc Welding Process," Metallurgical and Materials Transactions A, Vol. 31A, Oct. 2000, Pg. 2537-2543. (Authors: Y. M. Zhang, C. Pan and A. T. Male.)

"Influence of Material Physical Properties in Plasma-Jet Forming of Sheet Metals," Sheet Metal 2001, Proceedings of the 9th International Conference. April 2-3, 2001. Pg. 183-190. Katholieke Universiteit, Leuven, Belgium. (Authors: A. T. Male, Y. W. Chen, C. Pan and Y. M. Zhang.)

"Modeling of Molten Cladding Flow and Diffusion of Si Across a Clad-Core Interface of an Aluminum Brazing Sheet," Proceedings of 6th International Conference on Brazing, High Temperature Brazing, and Diffusion Bonding. May 8-10, 2001. Aachen, Germany. (Authors: D. P. Sekulic, C. Pan, F. Gao and A. T. Male.)

"Automated System for Welding Based Rapid Prototyping," J. Mechatronics. Vol. 12/1, Dec 2001. Pg. 37-53. (Authors: YuMing Zhang, PengJiu Li, YiWei Chen and Alan T. Male.)

"Welding of Austenitic Stainless Steel Using Double-Sided Arc Welding Process," Materials Science and Technology, 17 (11): 1280-1284, 2001. (Authors: Y. M. Zhang, C. Pan and A. T. Male.)

"Flexible Forming of Sheet Metal Using Plasma Arc," Journal of Materials Processing Technology, 115 (1): 61-64, 2001. (Authors: A. T. Male, P.J. Li, Y.W. Chen, Y.M. Zhang.)

“Automated System for Welding Based Rapid Prototyping,” J. Mechatronics, 12 (1): 37-53, 2002. (Authors: YuMing Zhang, PengJiu Li, YiWei Chen and Alan T. Male).

“Solidification Microstructural Characteristics of Double-Sidid Arc Welding Process,” Acta Metallurgica Sinica, 38 (4): 427-432, April 2002. (Authors: Pan CX, Zhang YM, Male AT). In Chinese.

“Metallurgical Characteristics of Double-Sided Arc Welding in High Strength Structural Steels,” 6th Int. Trends in Welding Research Conf. Proceedings, April 2002, 500-505, Pine Mountain, GA. ASM International, 2003. (Authors: Y-M Zhang, A.T. Male, M. Jiang, S. Zhang and P. Xu).

“Plasma Arc Flexible Sheet Forming Technique and Its Process Characteristics,” China Mechanical Engineering, 14, (1), 75-78, 2003. (Authors: Chunxu Pan, YuMing Zhang and Alan T. Male). In Chinese.

“Rapid Prototyping of Sheet Metal Components by Plasma-Jet Forming," Journal of Materials Processing Technology, 135: 340-346, 2003. (Authors: A. T. Male, Y. W. Chen, C. Pan and Y. M. Zhang).

“Weld Deposition Based Rapid Prototyping: A Preliminary Study," Journal of Materials Processing Technology, 135: 347-357, 2003. (Authors: Y. M. Zhang, Y. W. Chen, P. J. Li and A. T. Male).

“Effect of Mold Vibration on the Solidification Process during Gravity Die Casting of AA 356,” Proc. Symp. on Solidification of Aluminum Alloys, March 2004, 361-368, Charlotte, NC. TMS, 2004. (Authors: Numan Abu-Dheir, Marwan Khraisheh, Kozo Saito and Alan Male).

“Silicon Morphology Modification in the Eutectic Al-Si Alloy Using Mechanical Mold Vibration,” Materials Science and Engineering A 393 (2005) 109-117. (Authors: Numan Abu-Dheir, Marwan Khraisheh, Kozo Saito and Alan Male).

“Toward Designing and Controlling the Microstructure and Properties of Aluminum Alloys Castings Using Mold Vibration,” Transactions of 33 rd North American Manufacturing Research Institution of SME, 2005, 311-317. (Authors: Numan Abu-Dheir, Marwan Khraisheh, K. Saito and A.T. Male).

Published Communications and Contributions to Discussions

Proc. Inst. Mech. Eng., 1961, 175, Pg 623. Contribution to discussion on paper by J. M. Thorp on "Mechanism of Lubrication in Cold Rolling," Proc. Inst. Mech. Eng., 1961, 175, (11), 593. (Author: A. T. Male.)

Proc. Inst. Mech. Eng., 1963-64, 178, Pt 1, (3), Pg 87. Contribution to discussion on paper by P. R. Lancaster and G. W. Rowe on "Experimental Study of the Influence of Lubrication Upon Cold Drawing Under Approximately Plane Strain Conditions at Low Speed," Proc. Inst. Mech. Eng., 1963-64, 178, Pt 1, (3), 69. (Author: A. T. Male.)

Proc. Inst. Mech. Eng., 1964-65, 179, Pt 3D, Pg 391. Contribution to discussion on paper by O. Pawelski on "Investigation of the Coefficient of Friction in Metal Forming," Proc. Inst. Mech. Eng., 1964-65, 179, Pt 3D, 80. (Author: A. T. Male.)

J. Inst. Metals, 1966, 94, Pg 431. Contribution to general discussion on Frictional Behaviour in Working Metals. (Author: A. T. Male.)

Contribution to written discussion in Friction and Lubrication in Metal Processing, ASME Symposium, New Orleans, LA. June 1966. Pg. 283-284, (Author: A. T. Male.)

Proc. Inst. Mech. Eng., 1967-68, 182, Pt3G, Pg 160. Contribution to general discussion at Symposium on Experimental Methods in Tribology, London, England. March 1968. (Author: A. T. Male.)

Proc. Inst. Mech. Eng., 1967-68, 182, Pg 796-797. Contribution to discussion on paper by S. C. Jain and A. N. Bramley on "Speed and Frictional Effects in Hot Forging," Proc. Inst. Mech. Eng., 1967-68, 182, Pt 1, (39), 783. (Authors: A. T. Male and V. DePierre.)

Contribution to written discussion on paper by J. A. Schey and J. A. Newnham on "Effect of Die Composition on Lubrication in Metalworking," presented at ASME-ASLE Lubrication Conf., Houston, TX. October 1969. (Author: A. T. Male.)

Trans. ASME, J. Eng. Ind., May 1970, 92, (1), Pg 451. Contribution to written discussion on paper by T. Altan, H. J. Henning and A. M. Sabroff on "The Use of Model Materials in Predicting Forming Loads in Metalworking," Trans. ASME, J. Eng. Ind, May 1970, 92, (1), 444. (Author: Alan T. Male.)

Trans. ASME, J. Lubr. Technol., July 1970, 92, (2), Pg397. Contribution to written discussion. (Authors: A. T. Male and V. DePierre.)

Trans. ASME, J. Lubr. Technol., July 1971, 93, (2), Pg 322. Contribution to written discussion on paper by P. W. Wallace and J. A. Schey, "Speed Effects in Forging Lubrication," Trans. ASME, J. Lubr. Technol., July 1971, 93, (2), 317. (Author: A. T. Male.)

Trans. ASME, J. Lubr. Technol., April 1977, 99, (2), Pg 234. Contribution to written discussion on paper by W. R. D. Wilson and S. Lak on "The Transport and Breakdown of Solid Lubricants in a Simple Forging Operation," Trans. ASME, J. Lubr. Technol., April 1977, 99, (2), 230. (Author: A. T. Male.)