Books and Proceedings

• Recent Trends in Constitutive Modeling of Advanced Materials. ASME-AMD Vol. 239. Published by the American Society of Mechanical Engineers. Edited byM. K. Khraisheh, T. A. Godfrey, and K. Willam. 2000. (ISBN No. 0-7918-1902-7).

Referreed Journal Papers

• Nazzal M., Khraisheh M. K. and Abu-Farha F., “The Effect of Strain Rate Sensitivity Evolution on Deformation Stability during Superplastic Forming”, Journal of Materials Processing and Technology, Accepted, In Press.
• Darras B., Khraisheh M. K., Abu-Farha F. and Omar M., “Friction Stir Processing of AZ31 Commercial Magnesium Alloy”, Journal of Materials Processing and Technology, Accepted, In Press.
• Nazzal M. and Khraisheh M. K., “On The Stability of Superplastic Deformation Using Nonlinear Wavelength Analysis”, Key Engineering Materials, Accepted, In Press.
• Abu-Farha F., Rawashdeh N. and Khraisheh M. K., “Superplastic Deformation of Magnesium Alloy AZ31 Under Biaxial Loading Condition”, Materials Science Forum, Accepted, In Press.
• Nazzal M., Khraisheh M. K. and Chandra N., “Impact of Selective Grain Refinement on Superplastic Deformation: Finite Element Analysis”, Materials Science Forum, Accepted, In Press.
• Nazzal M. and Khraisheh M. K., “Finite Element Modeling of Superplastic Forming in the Presence of Back Pressure”, Materials Science Forum, Accepted, In Press
• Abu-Farha F. and Khraisheh M. K., “Mechanical Characteristics of Superplastic Deformation of AZ31 Magnesium Allo”, ASM Journal of Engineering Materials and Performance, Accepted, In Press, To Appear in April 2007 Issue.
• Abu-Farha F. and Khraisheh M. K., “On the High Temperature Testing of Superplastic Materials”, ASM Journal of Engineering Materials and Performance, Accepted, In Press, To Appear in April 2007 Issue.
• Nazzal M. A. and Khraisheh M. K., “ The Effects of Stress State and Cavitation on Deformation Stability during Superplastic Forming ”, ASM Journal of Engineering Materials and Performance, Accepted, In Press, To Appear in April 2007 Issue.
• Thuramalla N, Nazzal M. and Khraisheh M. K. , “Variable Strain Rate Forming Technique to Optimize Superplastic Forming of AA 5083 Using Multiscale Stability Analysis”, International Journal of Forming Processes, Accepted, In Press, To Appear in January 2007 Issue.
• Gupta G., El-Ghannam A., Kirakodu S., Khraisheh M. K. and Zbib H., “ Enhancement of Osteoblastic Gene Expression by Mechanically Compatible Porous Nanocomposite ”, Journal of Biomedical Materials Research: Applied Biomaterials, Accepted, In Press, Available on Line.
• Darras B., Omar M. and Khraisheh M. K., “ Experimental Thermal Analysis of Friction Stir Processing”, Materials Science Forum, Vols. 539-543, pp 3801-3806, 2007.
• Khraisheh M. K ., Abu-Farha F., Nazzal M. and Weinmann K., “ Combined Mechanics-Materials Based Optimization of Superplastic Forming of Magnesium AZ31 Alloy”, Annals of CIRP , Volume 55(1), pp 233-236, 2006.
• Gupta G., Zbib A., El-Ghannam A., Khraisheh M. K. and Zbib, H., “ Characterization of a novel bioactive composite using advanced X-Ray computed tomography ”, Composite Structures, Volume 71, pp 423-428, 2005.
• Abu-Dheir N., Khraisheh M. K., Saito K. and Male A, “Towards Designing and Controlling the Microstructure and Properties of Aluminum Alloy Castings Using Mold Vibration”, Transactions of the North American Manufacturing Research Institute (NAMRI/SME), Volume 33, pp 311-317, 2005.
• Abu-Farha F. and Khraisheh M. K., “Modeling of Anisotropic Deformation in Superplastic Sheet Metal Stretching”, ASME Journal of Engineering Materials and Technology, Vol.127 (1) pp 159-164, 2005.
• Abu-Dheir N., Khraisheh M. K., Saito K. and Male A., “Silicon Morphology Modification in the Eutectic Al-Si Alloy Using Mechanical Mold Vibration”, Materials Science and Engineering A, Vol. 393, pp 109-117, 2005.
• Khraisheh M. K. , Darras B., Kalu P., Adams-Hughes M. and Chandra N., “Correlation Between the Microstructure and Forces Generated During Friction Stir Processing of AA5052”, Materials Science Forum, Vols. 475-479, pp 3043-3046, 2005.
• Chandra N., Khraisheh M. K. and Kalu P., “Effect of State of Stress on the Cavitation Behavior of Al 5083 Superplastic Material”, Materials Science Forum, Vols. 475-479, pp 2931-2936, 2005.
• Nazzal M., Khraisheh M. K. and Darras B., “Finite Element Modeling and Optimization of Superplastic Forming Using Variable Strain Rate Approach”, ASM Journal of Engineering Materials and Performance”, Vol. 13(6), pp 691-699, 2004.
• Thuramalla N. and Khraisheh M. K., “Multiscale-Based Optimization of Superplastic Forming”, Transactions of the North American Manufacturing Research Institute (NAMRI/SME), Vol. 32, pp 637-643, 2004.
• Thuramalla N., Deshmukh P. and Khraisheh M. K., “Multi-Scale Analysis of Failure during Superplastic Deformation”, Materials Science Forum, Vols. 447-448, 105-110, (2004).
• Abu-Farha F. and Khraisheh M. K., “Constitutive Modeling of Deformation-Induced Anisotropy in Superplastic Materials”, Materials Science Forum, Vols. 447-448, 165-170, (2004).
• Khan S. and Khraisheh M. K., “A New Criterion for Mixed Mode Fracture Initiation Based on the Crack Tip Plastic Core Region”, International Journal of Plasticity, Vol. 20, 55-84, (2004).
• Shuaib A., Merah N., Khraisheh M.K., Allam I. And Al-Anizi S. “Experimental Investigation of Heat Exchanger Sheet Hole Enlargement”. ASME Journal of Pressure Vessel Technology , Vol. 125(1), 19-25, 2003.
• Khraisheh, M.K . and Abu-Farha, F., “Microstructure-Based Modeling of Anisotropic Superplastic Deformation”, Transactions of the North American Manufacturing Research Institute (NAMRI/SME), Vol. 31, 41-47, 2003.
• Khraisheh, M. K . An Investigation of Yield Potentials in Superplastic Deformation. ASME Journal of Engineering Materials and Technology. Vol 122(1), 93-98, 2000.
• Khraisheh, M. K . On the Failure Characteristics of Superplastic Sheet Materials Subjected to Gas Pressure Forming. Scripta Materialia. Vol. 42, 257-263, 2000.
• Khraisheh, M. K. and S. M. Khan, “Maximum Stress Triaxiality Ratio Criterion for Mixed Mode Crack Initiation in Anisotropic Materials”. International Journal of Fracture, Volume 104, pp L11-L16, 2000
• S. M. Khan and Khraisheh M. K., “Analysis of Mixed Mode Crack Initiation Angles Under Various Loading Conditions”. Engineering Fracture Mechanics, Volume 67, pp 397-419, 2000.
• Khraisheh, M. K . and Zbib, H. M. Optimum Forming Loading Paths For Pb-Sn Superplastic Sheet Materials. ASME Journal of Engineering Materials and Technology. Vol. 121 (3), 341-345, 1999.
• Khraisheh, M. K . Bayoumi A. E. and Barnwal S. On the Mechanistic Modeling of Cutting Forces: Hole Making Using An End-Mill Cutter. Transactions of the North American Manufacturing Research Institute (NAMRI/SME). Vol. 27, pp 105-110, 1999.
• Khraisheh, M. K ., Zbib, H. M., Hamilton, C. H. and Bayoumi, A. E. Constitutive Modeling of Superplastic Deformation. Part I: Theory and Experiments. International Journal of Plasticity. Vol. 13 (1/2) pp. 143-164, 1997.
• Khraisheh, M. K ., Bayoumi, A. E., Hamilton, C. H., Zbib, H. M. and Zhang, K. Experimental Observation of Induced Anisotropy During the Torsion of Superplastic Pb-Sn Eutectic Alloy. Scripta Metallurgica et Materialia. Vol. 32 (7), pp. 955-959, 1995.
• Khraisheh, M. K ., Pezeshki, C. and Bayoumi, A. E. Time Series Based Analysis for Primary Chatter in Metal Cutting. Journal of Sound and Vibration. Vol. 180 (1), pp. 67-87, 1995.
• Zhu H. T., Zbib H. M. and Khraisheh M. K. Flow Strength and Size Effect of an Al-Si-Mg Composite Model System Under Multiaxial Loadings. Scripta Metallurgica et Materialia. Vol. 32 (11), pp. 1895-1902, 1995.
• Zhang K. Hamilton C. H., Zbib H. M. and Khraisheh, M. K.Observation of Transient Effects in Superplastic Deformation of Pb-Sn Eutectic Alloy. Scripta Metallurgica et Materialia. Vol. 32 (6), pp. 919-924, 1995.
• Zhang K., Khraisheh M. K., Bayoumi A. E., Hamilton C. H. and Zbib H. M. Anisotropy and Transient Effects in Superplastic Deformation. Materials Science Forum. Vols. 170-172, pp. 583-588, 1994.

Refereed Full Conference Papers

• Abu-Farha F. and Khraisheh M. K, “On the Superplastic Forming of AZ31 Magnesium Alloys”, Proceedings of the 7 th International Conference on Magnesium and its Applications, Dresden, Germany, November 2006.
• Nazzal M. and Khraisheh M., “ On The Stability of Superplastic Biaxial Stretching Using Finite Element Simulations”, Proceedings of the 2005 European Conference on Superplastic Forming (EuroSPF) , Manchester, United Kingdom, June 2005.
• Nazzal M. and Khraisheh M., “Finite Element Simulation of Superplastic Forming Using a Microstructure Based Constitutive Model”, Proceedings of the 2005 ABAQUS Users Conference, Stockholm, Sweden, May 2005.
• Abu-Farha F. and Khraisheh M. K., “Deformation characteristics of AZ31 magnesium alloy under various forming temperatures and strain rates”, Proceedings of the Eighth ESAFORM Conference on Material Forming, Cluj Napoca, Romania, April 2005.
• Thuramalla N. and Khraisheh M.K., “Optimum Variable Strain Rate Deformation Paths for Superplastic Forming of AA5083 Using Multiscale Stability Criterion”, Proceedings of the Eighth ESAFORM Conference on Material Forming, Cluj Napoca, Romania, April 2005.
• Abu-Farha, F. K., Nazzal, M. A. and Khraisheh, M. K., “Modeling and Simulation of Superplastic Forming Process”, Proceedings of the Eighth International Conference on Production Engineering, Design and Control (PEDAC2004), Alexandria, Egypt, December 2004.
• Adams-Hughes M., Khraisheh M. K., Kalu P., Chandra N. and Osterholt G., “Effect of Processing Parameters on the Microstructure and Texture of Friction Stir Processed Al-5052 Alloys”, Proceedings of SECTAM XXII, Developments in Theoretical and Applied Mechanics, edited by Hassan Mahfuz and Mahesh V Hosur, ISBN 0-615-12639-1, pp 479-488, 2004.
• Khraisheh M. K. , Abu-Farha F. and Deshmukh P. ,“Microstructure-Based Modeling and Simulation of Superplastic Forming Process”, Proceedings of the 2004 European Conference on Superplastic Forming, edited by Gerald Bernhart, Thierry Cutard and Philippe Lours, Albi, France, pp 75-80, 2004.
• Deshmukh P., Thuramalla N. Abu-Farha K. and Khraisheh M. K., “Integrated Approach to Optimization of Superplastic Forming”, Proceedings of a Symposium on Advances in Superplasticity and Superplastic Forming, the 2004 Annual TMS meeting, Charlotte, NC, pp 361-369.
• Abu-Dheir N. Khraisheh M. Saito K. and Male A., “Effect of Mold Vibration on the Solidification Process during Gravity Die Casting of AA 356”, Proceedings of a Symposium on Solidification of Aluminum Alloys, the 2004 Annual TMS meeting, Charlotte, NC, pp 361-368.
• Itharaju R. and Khraisheh M., “On the Forces Generated During Friction Stir Processing of Aluminum Alloys”, Procedings of a Symposium on Ultrafine Grained Materials III , the 2004 Annual TMS meeting, Charlotte, NC, pp 173-178.
• F. K. Abu-Farha, P. V. Deshmukh, M. K. Khraisheh and N. V. Thuramalla, “Superplastic Forming: Stretching the Limits of Fabricating Medical Devices and Implants”, Proceedings of the ASM Materials & Processes for Medical Devices Conference, September 2003, Anaheim, CA, ASM International Publications, pp 368-373.
• Khraisheh, M.K ., “ Some Aspects of Superplastic Deformation”, First and Second International Symposia on Superplasticity and Superplastic Forming Technology, ASM International Publications, 146-153, 2003.
• Thuramalla N. and Khraisheh, M.K., “Effects of Microstructural Evolution On the Stability of Superplastic Deformation”, Second MIT Conference on Computational Fluid and Solid Mechanics, Elsevier Publishing, Vol. 1, 683-686, 2003.
• Khan, S. And Khraisheh, M.K., “Predicting Mixed Mode Crack Initiation Angles in Anisotropic Materials using the Shape of the Crack Tip Core Region”, American Society of Mechanical Engineers, ASME PVP, Vol. 443-2, pp 105-114, 2002.
• Shuaib A., Merah N., Khraisheh M.K., Allam I. And Al-Anizi S. Experimental Investigation of Heat Exchanger Sheet Hole Enlargement. American Society of Mechanical Engineers, ASME-PVP, Vol. 426, pp 229-233, 2001
• Khraisheh M. K. , “Constitutive Modeling of Multiaxial Deformation and Induced Anisotropy in Superplastic Materials”. American Society of Mechanical Engineers, ASME AMD Vol. 239, pp 79-94, 2000.
• S. M. Khan and Khraisheh M. K., “The Effect of Crack Tip Core Region on the Crack Initiation Angles under Mixed Mode Loading”. American Society of Mechanical Engineers, ASME PVP Vol. 404, pp 45-54, 2000.
• Khraisheh M. K . Mechanical Characterization and Constitutive Modeling of Superplastic Materials Under Multiaxial Loading Conditions. Proceedings of the Saudi-French Workshop on Recent Developments in Material Processing and Modeling, KFUPM, Dhahran, Saudi Arabia, KFUPM Pusblishing, pp. 31-40, 1997.
• Hamilton C. H., Zhang K., Khraisheh M. K. and Zbib H. M. Superplastic Flow Under Transient Conditions and Multiaxial Stresses. Superplasticity and Superplastic Forming. Edited by A. K. Ghosh and T. R. Bieler . The Minerals, Metals & Materials Society, pp 181-188 (1995)

Conference Presentations and Short Papers

• Highlight Presentation , “On the Superplastic Forming of Magnesium Alloys”, 7 th International Conference on Magnesium and its Applications”, Dresden, Germany, November 2006.
• Invited Lecture , “Superplastic Forming of Lightweight Alloys”, 2006 Fabtech International and AWS Welding Show, Atlanta, Georgia, October 2006 .
• Khraisheh M ., “Optimization of Superplastic Forming of Magnesium Alloys”, 56 th CIRP General Assembly, Kobe, Japan, August 2006.
• Khraisheh M ., “Effect of Strain Rate Sensitivity Evolution on the Deformation during Superplastic Forming”, 2006 AMPT Conference, Las Vegas, July 2006.
• Khraisheh M ., “Friction Stir Processing of Commercial Magnesium Alloys”, 2006 AMPT Conference, Las Vegas, July 2006.
• Khraisheh M ., “Thermal Analysis of Friction Stir Processing using Infrared Technology”, THERMEC 2006, Vancouver, British Columbia, Canada, July 2006.
• Khraisheh M ., “Superplastic Deformation of Magnesium Alloys Under Biaxial Loading”, ICSAM2006, Chengdu, China, June 2006.
• Khraisheh M ., “Finite Element Modeling of Superplastic Forming with Back Pressure”, ICSAM2006, Chengdu, China, June 2006.
• Khraisheh M. , “Effect of Selective Microstructural Modification on Superplastic Forming”, ICSAM2006, Chengdu, China, June 2006.
• Khraisheh M ., “Friction Stir Processing of Aluminum 5052 Alloys”, 2006 TMS Meeting, San Antonio, March 2006.
• Khraisheh M. , “On the Superplastic Forming Properties of Magnesium AZ31”, 2006 TMS Meeting, San Antonio, March 2006.
• Khraisheh M. K., “ The Use of Magnesium in the Transportation Industry” , Second International Conference on Applications of Materials in Harsh Environments, American University of Sharjah, UAE, March 2006.
• Khraisheh M. K. , “Constitutive Modeling of Superplastic Deformation of Magnesium Alloys”. American Society of Mechanical Engineers Annual Winter Meeting, Orlando, November 2005
• Khraisheh M ., “Microstructure Based Optimization of Superplastic Deformation”, The 2005 European Congress on Advanced Materials and Processes, Prague, Czech Republic, September 2005 (Poster).
• Invited Speaker , “Superplastic Forming: Modeling Approaches and Applications”, S ociety of Manufacturing Summit (2005 SME Summit), Milwaukee, Wisconsin, August 2005.
• Khraisheh M., “ On The Stability of Superplastic Biaxial Stretching Using Finite Element Simulations”, The 2005 European Conference on Superplastic Forming (EuroSPF) , Manchester, United Kingdom, June 2005.
• Khraisheh M ., “Finite Element Simulation of Superplastic Forming Using a Microstructure Based Constitutive Model”, The 2005 ABAQUS Users Conference, Stockholm, Sweden, May 2005.
• Keynote Speaker , “Optimum Variable Strain Rate Deformation Paths for Superplastic Forming of AA5083 Using Multiscale Stability Criterion”, T he Eighth ESAFORM Conference on Material Forming, Cluj Napoca, Romania, April 2005.
• Khraisheh M. K ., “Deformation characteristics of AZ31 magnesium alloy under various forming temperatures and strain rates”, The Eighth ESAFORM Conference on Material Forming, Cluj Napoca, Romania, April 2005 (Poster).
• Khraisheh M ., “Deformation Characteristics of AZ31 Magnesium Alloy Under Various Forming Temperatures and Strain Rates”, 2005 TMS Meeting, San Francisco, CA, March 2005.
• Khraisheh M., “ Integrated Approach to Superplastic Forming of Advanced Materials”, The 2005 NSF DMI Grantees Conference, Scottsdale, Arizona, January 2005.
• Khraisheh M ., “ Characterization of a novel bioactive composite using advanced X-Ray computed tomography ”, The Fifth International Conference on Composite Science and Technology, Sharjah, UAE, January 2005.
• Khraisheh M. K ., “Modeling and Simulation of Superplastic Forming Process”, Eighth International Conference on Production Engineering, Design and Control (PEDAC2004), Alexandria, Egypt, December 27, 2004.
• Khraisheh, M. K ., “Constitutive Modeling of Multiaxial Anisotropic Superplastic Deformation”, 2004 ASME International Congress and Exposition , Anaheim, CA., November 2004.
• Khraisheh M. K., “ Microstructure-Based Modeling and Simulation of Superplastic Forming Process ”, The 2004 European Conference on Superplastic Forming, Albi, France, July 2004.
• Khraisheh M. K., “Finite Element Modeling and Optimization of Superplastic Forming Using Variable Strain Rate Approach” Aeromat 2004, Seattle, WA, June 2004.
• Keynote Speaker, “ Advanced Metal Forming and Materials Processing: The need for Multiscale and Multidisciplinary Approach” , First International Conference on Applications of Materials in Harsh Environments, American University of Sharjah, UAE, January 21, 2004.
• Khraisheh, M. K ., “Multi-Scale Analysis of Deformation and Failure during Superplastic Forming”, 2003 ASME International Congress and Exposition , Washington D.C., November 2003.
• Khraisheh M. K ., “Superplastic Forming: Stretching the Limits of Fabricating Medical Devices and Implants”, ASM Materials & Processes for Medical Devices Conference, Anaheim, CA, September 8-10 2003.
• Khraisheh, M. K ., “Multi-Scale Analysis of Failure during Superplastic Deformation”, 8th International Conference on Superplasticity in Advanced Materials, Oxford University, UK, July 2003.
• Khraisheh, M. K ., “Constitutive Modeling of Deformation-Induced Anisotropy in Superplastic Materials”, 8th International Conference on Superplasticity in Advanced Materials, Oxford University, UK, July 2003 (Poster).
• Khraisheh M.K ., “Multiscale Analysis of Deformation and failure During Superplastic Deformation”, 10 th International Symposium on Plasticity and its Applications. Quebec City, Canada, July 2003.
• Khraisheh, M.K., “ Analysis of Anisotropy during Superplastic Deformation ”, 2003 ASME Mechanics and Materials Conference, Scottsdale, Arizona, June 2003.
• Khraisheh, M.K., “ Microstructure-Based Modeling of Anisotropic Superplastic Deformation”, 2003 NAMRC/SME , Hamilton, Ontario, Canada, May 2003.
• Khraisheh, M.K ., “ Some Aspects of Superplastic Deformation”, ASM International Symposium on Superplasticity and Superplastic Forming, Columbus, OH, October 2002.
• Khraisheh, M.K ., “Microstructural Evolution and Interaction During Superplastic Deformation”, 14 th US National Congress of Theoretical and Applied Mechanics, Blacksburg, VA, June 2002
• Khraisheh, M.K ., “Void Growth-Grain Growth Interaction During Superplastic Deformation”, 9 th International Symposium on Plasticity and its Applications, Aruba, January 2002.
• Khraisheh , M. K. “Constitutive Modeling of Superplastic Deformation”, Presented at the Conference in Mathematical Analysis and Its Applications, American University of Sharjah, UAE, May 2-4, 2001.
• Khraisheh M. K . Constitutive modeling of multiaxial deformation and induced anisotropy in superplastic materials, The 2000 ASME International Congress and Exposition , Orlando, FL, Nov 5-10 2000.
• Khraisheh M. K . Bulge Forming of Superplastic Sheet Materials Under Strain Rate-Controlled Pressure Profiles. Proceedings, Symposium on Superplasticity and Superplastic Forming, edited by M. A. Khaleel, pp. 27-29. Prepared for U.S. D.O.E., PNNL-SA-30406. Society of Engineering Science, Pullman, WA, USA, September 27-30 1998. Invited Paper.
• Khraisheh M. K . and Bayoumi A. E. Analysis of Cutting Forces in Hole Making Operation Using and End-Mill. Society of Engineering Science 35 th Annual Technical Meeting, held in Pullman, Washington, September 27-30 1998.
• Khraisheh M. K . Mechanical Characterization and Constitutive Modeling of Superplastic Materials Under Multiaxial Loading Conditions. Saudi-French Workshop on Recent Developments in Material Processing and Modeling, KFUPM, Dhahran, Saudi Arabia, November 11-12 1997.
• Khraisheh M. K . and Zbib H. M. Constitutive Modeling of Anisotropic Superplastic Deformation. Physics and Mechanics of Finite Plasticity and Viscoplastic Deformation, edited by A. S. Khan, pp. 45-46. Sixth International Symposium on Plasticity and Its Current Applications. Juneau, Alaska, USA, July 14-18 1997. Invited Paper.
• Khraisheh, M. K ., Bayoumi, A. E., Hamilton, C. H., and Zbib, H. M. Multiaxial Deformation of Superplastic Materials. Proceedings of the 1994 NSF Design and manufacturing Grantees Conference. MIT, Cambridge, Massachusetts, January 1994.
• Zhang, K., Khraisheh, M. K., Bayoumi, A. E., Hamilton, C. H., and Zbib. Mechanical Characterization of Superplastic Materials Using Tension / Torsion Methods. Proceedings of the 1994 NSF Design and manufacturing Grantees Conference. MIT, Cambridge, Massachusetts, January 1994.
• Khraisheh M. K .. Advanced Manufacturing Concepts in Shaping Superplastic Sheet Materials. Fourth ASME Northwest International Region VIII Graduate Students Technical Conference. University of British Columbia, Vancouver, Canada. May 13-14 1994.
• Khraisheh, M. K . Experimental and Analytical Investigation of Chatter Vibration in Orthogonal Cutting. Third ASME Northwest International Region VIII Graduate Students Technical Conference. Washington State University, Pullman, WA. April 17-18 1992.

• Khraisheh, M. K . Wavelet Transform Analysis for Metal Cutting Chatter Phenomenon. Second ASME Northwest International Region VIII Graduate Students Technical Conference. University of Washington, Seattle, WA. April 12-13 1991.
• Overview of Superplastic Forming Research at Washington State University . INVITED LECTURER. School of Mechanical and Materials Engineering, Washington State University. Presentation was given to the External Advisory Board. November 1993.

Other Publications

• Khraisheh M.K., “Superplasticity and Superplastic Forming” Feature Article, Advanced Manufacturing, Center for Robotics and Manufacturing Systems, College of Engineering, University of Kentucky. Spring 2002, Vol. 15 No. 1.
• Khraisheh M. K., “Advanced Manufacturing Concepts: Superplastic Forming”. Feature Article. College of Engineering Newsletter, Issue # 8, Spring 1999. College of Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia.
• Khraisheh M. K., Book Review. Using Finite Elements in Mechanical Design, by J. T. Mottram and C. T. Shaw, McGraw-Hill, 1996. Arabian Journal for Science and Engineering. 23 (1B) pp. 145-146 (1998).

•  Previous Section  •  Next Section  •