(A selected list - aluminum brazing for heat exchangers, heat exchangers)

Sekulic, D.P., Salazar, A.J., Gao, F., Rosen, J.S., and Hutchins, H.F., Transient Behavior of a Compact Heat Transfer Surface During Brazing, 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki, Greece, September 24-28, 2001, in print.

Zellmer, B.P., Nigro, N., and Sekulic, D.P., Numerical Modelling and Experimental Verification of the Formation of 2D and 3D Brazed Joints, Modeling and Simulation in Materials Science and Engineering, 2001, in print.

Sekulic, D.P., An Equilibrium Membrane of a Micro Layer of a Molten Aluminum Alloy at the Onset of Solidification, International Journal of Engineering Sciences, Vol. 39 (2001) pp. 229-241.

Sekulic D.P., Behavior of a Molten Aluminum Micro Layer During Brazing, an invited article in Recent Research Developments in Heat, Mass & Momentum Transfer, Research Signpost Publ., Trivandrum, Vol. 2, 1999, pp. 121-140.

Sekulic, D.P., Pan, C., Gao, F., and Male, A.T., Modeling of Molten Cladding Flow and Diffusion of Si Across a Clad-Core Interface in Aluminum Brazing Sheet to be presented at the 6th Int. Conf. On Brazing, High Temp. Brazing and Diffusion Bonding, Deutscher Verband Für Schweissen und verwandte Verfahren, e.V., Aachen, Germany, May 8-10 (2001) (in print).

Sekulic, D.P., Modeling of the Brazed Joint Shape Topology for Complex Mating Surfaces, IBSC 2000, Int. Brazing and Soldering Conference, ASW, April 2-5, 2000, Albuquerque, published in Advanced Brazing and Soldering Technologies, ASM International, Materials Park, OH, 2000, pp.419-426.

Sekulic, D.P., Brazed Joints in Aluminum Compact Heat Exchangers. Joint Shape Modeling, Int. Conf. on Heat Exchangers for Sustainable Development, Lisbon, Portugal, 15-18 June 1998, published in the Proceedings of the conference, Heat Exchangers for Sustainable Development, IST, Lisbon, 1998, pp.377-386.

Sekulic, D.P., Molten Metal Micro Layer Prior to Joint Formation During Brazing. A Prolegomena for Scaling Analysis, Proc. Of the Third Int. Symp. On Scale Modeling, Nagoya, Japan, JSME (2000), CD Edition, pp. 86-93.

H. Zhao and D.P. Sekulic, Brazed Fin-Tube Joint Thermal Integrity vs. Joint Formation, Proc.of the 2001 NSF Design, Service and Manufacturig Grantees and Research Conference, Tampa, FL, January 7-10, 2001, CD edition, EPP, University of Washington, 2001.

Shah, R.K. and Sekulic, D.P., Heat Exchangers, Chapter in Handbook of Heat Transfer , McGraw Hill, 3rd Edition (Edited by W.M. Rohsenow, J.P. Hartnett and Y.I. Cho), Chapter 17, 1998, pp. 17.1-17.169.