Brazing Research
Fundamental Research in Modeling of Brazing Processes
• Brazing
Research Laboratory Capabilities • Brazed
Joint Formation and Its Topology •
• Fundamentals
of Molten Metal Micro Layer Flows • Modeling
of a Brazing Process •
Brazing Research
Contact Dr.
Dusan P. Sekulic, UK Center for Manufacturing,
210A CRMS Bldg., College of Engineering, University of Kentucky, Lexington,
KY 40506. Phone 859-257-2972 or 859-257-6262 Ext. 425, Fax 859-257-1071,
e-mail: sekulicd@engr.uky.edu
| |
 |
The image represents
the brazing facility during a high
speed imaging session. A brazing cycle is executed while
fully controlled by a computer system through the controller
feedback sensing surface temperature change in real time.
|
Program Manager:
- Dr. D. P. Sekulic,
Center for Manufacturing,
College of Engineering, University of Kentucky (UK)
Research Team:
- Dr. J.J. Morris, Professor, CME, UK
- Dr. A.T. Male, Professor, Center for Manufacturing, UK
- Dr. A. Salazar, Senior Research Engineer, ME UK
- Dr. N. Nigro, Professor, MEIE, Marquette University
- Dr. L. Walker, HTML, Oak Ridge National Laboratory
- Ms. H. Zhao, Ph.D. Candidate, Center for Manufacturing, UK
- Mr. F. Gao, Ph.D. Candidate, Center for Manufacturing, UK and Harbin Insititute of Technology,
China
- Mr. Richard Anderson, Center for Manufacturing, UK, Laboratory Manager
- Mr. B. Young, Center for Manufacturing, UK, Senior Industrial Extension Specialist
- Mr. B.P. Zellmer, Research Engineer, Marquette University
 |
The image represents
an interface between a Si reach Al
alloy micro layer and the substrate core at room
temperature before brazing. Intense diffusion migration
at the atomic level characterizes a temperature ramp-up
prior to alloy melting. |
International Participants:
- Dr. C. Pan, Professor, Wuhan University of Technology
- Dr. Y. Qian, Professor, Harbin Institute of Technology
- Dr. P. Galenko, German Aerospace Institute and Udmurt State University
Undergraduate Students:
- Mr. M. Rensing
- Mr. J. Meeks
- Mr. J. Basham
- Ms. A. Foushee
Brazing Research
Laboratory Capabilities
Fundamentals of
Molten Metal Micro Layer Flows
Brazed Joint Formation
and Its Topology
Modeling of a
Brazing Process
About Dr.
Dusan P. Sekulic
References
Brazing Research
Top
|
|
